Cut Sheet Threaded Installation Instructions Groove Installation Instructions CAD Files Specifications Warranty
Similar to the Model 2500, the Model 2511T TESTanDRAIN® is a 300 PSI rated single handle ball valve that was specifically designed to provide both the test function and the express drain function required for a wet fire sprinkler system. The Model 2511T provides an alternate handle location from the Model 1011T for multi-directional installions. It features a tamper resistant test orifice, integral tamper resistant sight glasses, and a tapped port for system access. The Model 2511T has the added feature of a Model 7000 Pressure Relief Valve with drainage piping, Model 7500 Pressure Gauge, and Model 7600 1/4" 3-Way Globe Valve. It is designed to relieve excess pressure caused by surges or temperature changes while solving the difficult problem of providing the relief valve with a drainage-piping outlet. The Model 2511T complies with the requirements of NFPA 13 which stipulate a pressure relief valve be installed on all gridded systems and downstream of all pressure reducing valves. Available in 1" and 1-1/4" NPT and 2" Groove with all specifiable orifice sizes: 3/8" (2.8K), 7/16" (4.2K), 1/2" (5.6K), 17/32" (8.0K), 5/8" (11.2K, ELO), 3/4" (14.0K, ESFR), and K25.
Repair Kits are available for all TESTanDRAIN® valves. For more information, visit the "Support" page.
